Các bài viết có thể truy cập công khai - Michele BattistoniTìm hiểu thêm
Không có ở bất kỳ nơi nào: 16
Assessment of port water injection strategies to control knock in a GDI engine through multi-cycle CFD simulations
M Battistoni, CN Grimaldi, V Cruccolini, G Discepoli, M De Cesare
SAE Technical Paper, 2017
Các cơ quan ủy nhiệm: Government of Italy
Numerical investigation of two-phase flow evolution of in-and near-nozzle regions of a gasoline direct injection engine during needle transients
K Saha, S Som, M Battistoni, Y Li, E Pomraning, PK Senecal
SAE International Journal of Engines 9 (2), 1230-1240, 2016
Các cơ quan ủy nhiệm: US Department of Energy
Penetration and combustion characterization of cavitating and non-cavitating fuel injectors under diesel engine conditions
FR Westlye, M Battistoni, SA Skeen, J Manin, LM Pickett, A Ivarsson
SAE Technical Paper, 2016
Các cơ quan ủy nhiệm: US Department of Energy, Danish Council for Strategic Research, Government …
Coupled Eulerian internal nozzle flow and Lagrangian spray simulations for GDI systems
K Saha, S Quan, M Battistoni, S Som, PK Senecal, E Pomraning
SAE Technical Paper, 2017
Các cơ quan ủy nhiệm: US Department of Energy
Prediction of the nozzle flow and jet characteristics at start and end of injection: transient behaviors
M Battistoni, C Poggiani, S Som
SAE International Journal of Engines 9 (1), 84-97, 2016
Các cơ quan ủy nhiệm: US Department of Energy
Modeling of internal and near-nozzle flow for a GDI fuel injector
K Saha, S Som, M Battistoni, Y Li, S Quan, PK Senecal
Internal Combustion Engine Division Fall Technical Conference 57281, V002T06A015, 2015
Các cơ quan ủy nhiệm: US Department of Energy
Thermodynamic modeling of trans/supercritical fuel sprays in internal combustion engines based on a generalized cubic equation of state
H Zhu, M Battistoni, BM Ningegowda, FNZ Rahantamialisoa, Z Yue, ...
Fuel 307, 121894, 2022
Các cơ quan ủy nhiệm: National Natural Science Foundation of China
Experimental and numerical investigations of the early flame development produced by a corona igniter
F Ricci, J Zembi, M Battistoni, C Grimaldi, G Discepoli, L Petrucci
SAE Technical Paper, 2019
Các cơ quan ủy nhiệm: Government of Italy
Modeling of flash boiling phenomenon in internal and near-nozzle flow of fuel injectors
K Saha, M Battistoni, S Som
Droplets and Sprays: Applications for Combustion and Propulsion, 167-181, 2017
Các cơ quan ủy nhiệm: US Department of Energy
Numerical simulation of the early flame development produced by a barrier discharge igniter in an optical access engine
J Zembi, F Ricci, C Grimaldi, M Battistoni
SAE Technical Paper, 2021
Các cơ quan ủy nhiệm: Government of Italy
Influence of turbulence and thermophysical fluid properties on cavitation erosion predictions in channel flow geometries
GM Magnotti, M Battistoni, K Saha, S Som
SAE International Journal of Advances and Current Practices in Mobility 1 …, 2019
Các cơ quan ủy nhiệm: US Department of Energy
Numerical investigation of water injection effects on flame wrinkling and combustion development in a GDI spark ignition optical engine
J Zembi, F Mariani, M Battistoni, A Irimescu, S Merola
SAE Technical Paper, 2021
Các cơ quan ủy nhiệm: Government of Italy
Investigations on hydrogen injections using a real-fluid approach
F Rahantamialisoa, M Battistoni, A Miliozzi, N Sahranavardfard, J Zembi
SAE Technical Paper, 2023
Các cơ quan ủy nhiệm: Government of Italy
Pressure and Flow Field Effects on Arc Channel Characteristics for a J-Type Spark Plug
J Zembi, M Battistoni, F Mariani, A Irimescu, SS Merola
SAE Technical Paper, 2022
Các cơ quan ủy nhiệm: Government of Italy
Experimental and Numerical Investigation of the Flow Field Effect on Arc Stretching for a J-type Spark Plug
J Zembi, F Mariani, C Grimaldi, M Battistoni, A Irimescu, S Merola
SAE Technical Paper, 2021
Các cơ quan ủy nhiệm: Government of Italy
Modeling of cavitation in fuel injectors with single-and two-fluid approaches
K Saha, M Battistoni, S Som, X Li
Two-Phase Flow for Automotive and Power Generation Sectors, 185-201, 2019
Các cơ quan ủy nhiệm: US Department of Energy
Có tại một số nơi: 19
An Eulerian CFD model and X-ray radiography for coupled nozzle flow and spray in internal combustion engines
Q Xue, M Battistoni, CF Powell, DE Longman, SP Quan, E Pomraning, ...
International Journal of Multiphase Flow 70, 77-88, 2015
Các cơ quan ủy nhiệm: US Department of Energy
EFFECTS OF NONCONDENSABLE GAS ON CAVITATING NOZZLES
SS Michele Battistoni, Daniel J. Duke, Andrew B. Swantek, F. Zak Tilocco ...
Atomization and Sprays 25 (6), 453-483, 2015
Các cơ quan ủy nhiệm: US Department of Energy
Highly resolved Eulerian simulations of fuel spray transients in single and multi-hole injectors: Nozzle flow and near-exit dynamics
M Battistoni, S Som, CF Powell
Fuel 251, 709-729, 2019
Các cơ quan ủy nhiệm: US Department of Energy, Government of Italy
Large-eddy simulation (LES) of spray transients: start and end of injection phenomena
M Battistoni, Q Xue, S Som
Oil & Gas Science and Technology–Revue d’IFP Energies nouvelles 71 (1), 4, 2016
Các cơ quan ủy nhiệm: US Department of Energy
Chương trình máy tính sẽ tự động xác định thông tin xuất bản và thông tin về nhà tài trợ