Theo dõi
John Samuel Dilip Jangam
John Samuel Dilip Jangam
Research Engineer III, HP Labs, Palo Alto, CA
Email được xác minh tại hp.com
Tiêu đề
Trích dẫn bởi
Trích dẫn bởi
Năm
Influence of processing parameters on the evolution of melt pool, porosity, and microstructures in Ti-6Al-4V alloy parts fabricated by selective laser melting
JJS Dilip, S Zhang, C Teng, K Zeng, C Robinson, D Pal, B Stucker
Progress in Additive Manufacturing 2, 157-167, 2017
4272017
Melt pool characterization for selective laser melting of Ti-6Al-4V pre-alloyed powder
H Gong, H Gu, K Zeng, JJS Dilip, D Pal, B Stucker
University of Texas at Austin, 2014
2592014
Use of friction surfacing for additive manufacturing
JJS Dilip, S Babu, SV Rajan, KH Rafi, GDJ Ram, BE Stucker
Materials and Manufacturing Processes 28 (2), 189-194, 2013
1422013
Effects of powder variation on the microstructure and tensile strength of Ti6Al4V parts fabricated by selective laser melting
H Gu, H Gong, JJS Dilip, D Pal
University of Texas at Austin, 2014
1112014
Selective laser melting of HY100 steel: Process parameters, microstructure and mechanical properties
JJS Dilip, GDJ Ram, TL Starr, B Stucker
Additive Manufacturing 13, 49-60, 2017
1092017
Effects of particle characteristics on the microstructure and mechanical properties of 17-4 PH stainless steel fabricated by laser-powder bed fusion
H Irrinki, JSD Jangam, S Pasebani, S Badwe, J Stitzel, K Kate, O Gulsoy, ...
Powder Technology 331, 192-203, 2018
992018
Simulating melt pool shape and lack of fusion porosity for selective laser melting of cobalt chromium components
C Teng, H Gong, A Szabo, JJS Dilip, K Ashby, S Zhang, N Patil, D Pal, ...
Journal of Manufacturing Science and Engineering 139 (1), 011009, 2017
792017
A novel method to fabricate TiAl intermetallic alloy 3D parts using additive manufacturing
JJS Dilip, H Miyanaji, A Lassell, TL Starr, B Stucker
Defence technology 13 (2), 72-76, 2017
752017
Microstructure evolution in aluminum alloy AA 2014 during multi-layer friction deposition
JJS Dilip, GDJ Ram
Materials characterization 86, 146-151, 2013
722013
Microstructural characterization of dissimilar friction stir welds between AA2219 and AA5083
JJS Dilip, M Koilraj, V Sundareswaran, GD Janaki Ram, ...
Transactions of the Indian Institute of Metals 63, 757-764, 2010
652010
Mechanical activation-assisted solid-state combustion synthesis of in situ aluminum matrix hybrid (Al3Ni/Al2O3) nanocomposites
BSB Reddy, K Rajasekhar, M Venu, JJS Dilip, S Das, K Das
Journal of Alloys and Compounds 465 (1-2), 97-105, 2008
632008
Additive manufacturing with friction welding and friction deposition processes
JJS Dilip, GD Janaki Ram, BE Stucker
International Journal of Rapid Manufacturing 3 (1), 56-69, 2012
582012
A new additive manufacturing process based on friction deposition
J John Samuel Dilip, H Kalid Rafi, GD Janaki Ram
Transactions of the Indian Institute of Metals 64, 27-30, 2011
502011
Incommensurate Graphene Foam as a High Capacity Lithium Intercalation Anode
Tereza M. Paronyan, Arjun K.Thapa, Andriy Sherehiy, Jacek Jasinski, JJS Dilip
Scientific reports, 2017
492017
Effect of scan pattern on the microstructural evolution of Inconel 625 during selective laser melting
MA Anam, JJS Dilip, D Pal, B Stucker
University of Texas at Austin, 2014
452014
A short study on the fabrication of single track deposits in SLM and characterization
JJS Dilip, MA Anam, D Pal, B Stucker
University of Texas at Austin, 2016
412016
An experimental study of ceramic dental porcelain materials using a 3D print (3DP) process
S Zhang, H Miyanaji, L Yang, AA Zandinejad, JJS Dilip, B Stucker
University of Texas at Austin, 2014
412014
Influence of processing parameters on the evolution of melt pool, porosity, and microstructures in Ti-6Al-4V alloy parts fabricated by selective laser melting, Prog. Addit …
JJS Dilip, S Zhang, C Teng, K Zeng, C Robinson, D Pal, B Stucker
S40964-017-0030-2/FIGURES/11, 2017
382017
Microstructures and properties of friction freeform fabricated borated stainless steel
JJS Dilip, GD Janaki Ram
Journal of materials engineering and performance 22, 3034-3042, 2013
292013
Influence of small particles inclusion on selective laser melting of Ti-6Al-4V powder
H Gong, JJS Dilip, L Yang, C Teng, B Stucker
IOP Conference Series: Materials Science and Engineering 272 (1), 012024, 2017
282017
Hệ thống không thể thực hiện thao tác ngay bây giờ. Hãy thử lại sau.
Bài viết 1–20