Calibration and demonstration of the new Virginia Tech anechoic wind tunnel M Remillieux, E Crede, H Camargo, R Burdisso, W Devenport, M Rasnick, ... 14th AIAA/CEAS Aeroacoustics Conference (29th AIAA Aeroacoustics Conference …, 2008 | 73 | 2008 |
Aeroacoustic testing of wind turbine airfoils W Devenport, RA Burdisso, H Camargo, E Crede, M Remillieux, ... National Renewable Energy Laboratory (NREL), Blacksburg, Virginia, 2010 | 33 | 2010 |
Development and Testing of a Novel Acoustic Wind Tunnel Concept BS Smith, HE Camargo, RA Burdisso, WJ Devenport 11th AIAA/CEAS Aeroacoustics Conference and Exhibit, 2005 | 26 | 2005 |
Risk assessment of recordable occupational hearing loss in the mining industry K Sun, AS Azman, HE Camargo, PG Dempsey International journal of audiology 58 (11), 761-768, 2019 | 24 | 2019 |
Novel Kevlar-walled wind tunnel for aeroacoustic testing of a landing gear MC Remillieux, HE Camargo, PA Ravetta, RA Burdisso, WF Ng AIAA journal 46 (7), 1631-1639, 2008 | 21 | 2008 |
Human-centered design for mining equipment and new technology T Horberry, R Burgess-Limerick, LJ Steiner CRC Press, 2018 | 19 | 2018 |
Noise reduction of a model-scale landing gear measured in the Virginia Tech aeroacoustic wind tunnel M Remillieux, H Camargo, P Ravetta, R Burdisso, W Ng 14th AIAA/CEAS Aeroacoustics Conference (29th AIAA Aeroacoustics Conference …, 2008 | 18 | 2008 |
Noise source identification on a continuous mining machine HE Camargo, AK Smith, PG Kovalchik, RJ Matetic Proceedings of NCAD, 28-30, 2008 | 16 | 2008 |
A comparison of beamforming processing techniques for low frequency noise source identification in mining equipment HE Camargo, PA Ravetta, RA Burdisso, AK Smith ASME International Mechanical Engineering Congress and Exposition 43888, 205-211, 2009 | 13 | 2009 |
Aeroacoustic testing of a high-lift device model in the virginia tech anechoic wind tunnel K Yamamoto, H Ura, Y Yokokawa, T Imamura, K Nakakita, H Camargo, ... Proceedings of 13th CEAS-ASC Workshop & 4th Scientific Workshop of X3–Noise, 2009 | 12 | 2009 |
Engineered noise controls for miner safety and environmental responsibility HE Camargo, AS Azman, JS Peterson Advances in Productive, Safe, and Responsible Coal Mining, 215-243, 2019 | 11 | 2019 |
Development of noise controls for longwall shearer cutting drums HE Camargo, AS Azman, L Alcorn Noise control engineering Journal 64 (5), 573, 2016 | 11 | 2016 |
A frequency domain beamforming method to locate moving sound sources HE Camargo Virginia Tech, 2010 | 11 | 2010 |
Acoustic assessment of pneumatic and electric jackleg drills used in the mining industry. H Camargo, JS Peterson, P Kovalchik, LA Alcorn Journal of the Acoustical Society of America 127 (3), 1873, 2010 | 11 | 2010 |
Aeroacoustic study of a 26%-scale, high-fidelity, Boeing 777 main landing gear in a semi-anechoic-wind-tunnel test section M Remillieux, H Camargo, R Burdisso, W Ng 13th AIAA/CEAS Aeroacoustics Conference (28th AIAA Aeroacoustics Conference …, 2007 | 10 | 2007 |
Development of a validated finite element model of a longwall cutting drum HE Camargo, DS Yantek, AK Smith INTER-NOISE and NOISE-CON Congress and Conference Proceedings 2012 (8), 3637 …, 2012 | 8 | 2012 |
Structural vibration as a noise source on vibrating screens DS Yantek, HE Camargo ASME 2009 International Mechanical Engineering Congress & Exposition, 2009 | 7 | 2009 |
Area noise assessment at surface stone, sand, and gravel mines: application for reducing worker noise exposure AS Azman, HE Camargo, B Kim Mining, metallurgy & exploration 39 (2), 467-483, 2022 | 6 | 2022 |
Development of an instrumented longwall bit to measure coal cutting forces for use in developing noise controls. HE Camargo, G Gwaltney, LA Alcorn Mining Engineering 67 (5), 2015 | 6 | 2015 |
Sound radiation analysis of a longwall cutting drum J Yang, HE Camargo, DS Yantek ASME International Mechanical Engineering Congress and Exposition 56437 …, 2013 | 6 | 2013 |