Shi-Hoon Choi

Alıntı yapanlar

	Hepsi	2020 yılından bugüne
Alıntılar	7258	3496
h-endeksi	42	30
i10-endeksi	104	75

880

440

220

660

2003200420052006200720082009201020112012201320142015201620172018201920202021202220232024202523 64 71 81 117 91 139 179 214 190 265 274 381 355 359 395 498 485 554 714 660 873 208

Genel erişim

Tümünü görüntüle

6 makale

2 makale

genel erişime açık olanlar

genel erişime açık olmayanlar

Finansman sağlayan kuruluşun getirdiği zorunluluğa dayalı olarak

Katkıda bulunan yazarlar

Min-Seong KimWavesense Co., Ltd.wavesense.co.kr üzerinde doğrulanmış e-posta adresine sahip
Eun-Young KimSunchon National Universityscnu.ac.kr üzerinde doğrulanmış e-posta adresine sahip
Jaiveer SinghDepartment of Metallurgical and Materials Engineering, Indian Institute of Technology Jodhpuriitj.ac.in üzerinde doğrulanmış e-posta adresine sahip
Frederic BarlatPohang University of Science and Technologypostech.ac.kr üzerinde doğrulanmış e-posta adresine sahip
WAN CHUCK WOO (우완측)KAERI (원자력연구원)kaeri.re.kr üzerinde doğrulanmış e-posta adresine sahip
Lalit KaushikAssistant Professor, Indian Institute of Technology Jodhpur, Rajasthan, Indiaiitj.ac.in üzerinde doğrulanmış e-posta adresine sahip
Jeong Whan YoonProfessor, KAIST (Korea) / Deakin University (Australia)kaist.ac.kr üzerinde doğrulanmış e-posta adresine sahip
Jaehyung chokorea institute of materials sciencekims.re.kr üzerinde doğrulanmış e-posta adresine sahip
Dong-Kyu KimAssociate Professor of Department of Mechanical Engineering, Konkuk University, Seoulkonkuk.ac.kr üzerinde doğrulanmış e-posta adresine sahip
Ki-Seong ParkSunchon National University, Department of Advanced Components and Materials Engineerings.scnu.ac.kr üzerinde doğrulanmış e-posta adresine sahip
Yoon-Uk HeoGraduate Institute of Ferrous Technology in Pohang University of Science and Technologypostech.ac.kr üzerinde doğrulanmış e-posta adresine sahip
Dr. Aman GuptaResearch Professor, Sunchon National University, South Koreascnu.ac.kr üzerinde doğrulanmış e-posta adresine sahip
Akhtar S. KhanProfessor of Mecahnaical Engineering, UMBCumbc.edu üzerinde doğrulanmış e-posta adresine sahip
Jin-Yoo Suh (서진유)Korea Institute of Science and Technologykist.re.kr üzerinde doğrulanmış e-posta adresine sahip
Joo-Hee KangWavesense Co., Ltd.wavesense.co.kr üzerinde doğrulanmış e-posta adresine sahip
Dong-Ik Kim/ 김동익Principal researcher at Korea Institute of Science and Technologykist.re.kr üzerinde doğrulanmış e-posta adresine sahip
Abhishek Kumar SinghIIT Bombaydartmouth.edu üzerinde doğrulanmış e-posta adresine sahip
Farhang PourboghratProfessor of Integrated Systems Engineeringosu.edu üzerinde doğrulanmış e-posta adresine sahip
Mike Reecequeen mary or national physical or london or essexqmul.ac.uk üzerinde doğrulanmış e-posta adresine sahip
MUNEER BAIGPrince Sultan Universitypsu.edu.sa üzerinde doğrulanmış e-posta adresine sahip

Takip et

Shi-Hoon Choi

Department of Advanced Components and Materials Engineering, Sunchon National University

scnu.ac.kr üzerinde doğrulanmış e-posta adresine sahip

Material Texture Plasticity Theory Simulation Polycrystal Model Recrystallization


Başlık Alıntılara göre sırala Yıla göre sırala Başlığa göre sırala	Alıntı yapanlar Alıntı yapanlar	Yıl
Plane stress yield function for aluminum alloy sheets—part 1: theory F Barlat, JC Brem, JW Yoon, K Chung, RE Dick, DJ Lege, F Pourboghrat, ... International Journal of Plasticity 19 (9), 1297-1319, 2003	2128	2003
Simulation of deformation twins and deformation texture in an AZ31 Mg alloy under uniaxial compression SH Choi, EJ Shin, BS Seong Acta Materialia 55 (12), 4181-4192, 2007	215	2007
Evaluation of stored energy in cold-rolled steels from EBSD data SH Choi, YS Jin Materials Science and Engineering: A 371 (1-2), 149-159, 2004	181	2004
Quasi-static and dynamic responses of advanced high strength steels: experiments and modeling AS Khan, M Baig, SH Choi, HS Yang, X Sun International Journal of Plasticity 30, 1-17, 2012	180	2012
The effect of crystallographic orientation on the micromechanical deformation and failure behaviors of DP980 steel during uniaxial tension SH Choi, EY Kim, W Woo, SH Han, JH Kwak International Journal of Plasticity 45, 85-102, 2013	170	2013
Stress–strain relationship between ferrite and martensite in a dual-phase steel studied by in situ neutron diffraction and crystal plasticity theories W Woo, VT Em, EY Kim, SH Han, YS Han, SH Choi Acta materialia 60 (20), 6972-6981, 2012	169	2012
Formability of AA5182/polypropylene/AA5182 sandwich sheets KJ Kim, D Kim, SH Choi, K Chung, KS Shin, F Barlat, KH Oh, JR Youn Journal of Materials Processing Technology 139 (1-3), 1-7, 2003	165	2003
Evaluation of the stress-strain relationship of constituent phases in AlSi10Mg alloy produced by selective laser melting using crystal plasticity FEM DK Kim, JH Hwang, EY Kim, YU Heo, W Woo, SH Choi Journal of Alloys and Compounds 714, 687-697, 2017	134	2017
Stress partitioning behavior of an AlSi10Mg alloy produced by selective laser melting during tensile deformation using in situ neutron diffraction DK Kim, W Woo, JH Hwang, K An, SH Choi Journal of Alloys and Compounds 686, 281-286, 2016	115	2016
Stacking Fault Energy Analyses of Additively Manufactured Stainless Steel 316L and CrCoNi Medium Entropy Alloy Using In Situ Neutron Diffraction W Woo, JS Jeong, DK Kim, CM Lee, SH Choi, JY Suh, SY Lee, S Harjo, ... Scientific reports 10 (1), 1350, 2020	112	2020
Mechanical responses and deformation mechanisms of an AZ31 Mg alloy sheet under dynamic and simple shear deformations A Pandey, F Kabirian, JH Hwang, SH Choi, AS Khan International Journal of Plasticity 68, 111-131, 2015	107	2015
An investigation of the corrosion behavior of 316L stainless steel fabricated by SLM and SPS techniques AB Kale, BK Kim, DI Kim, EG Castle, M Reece, SH Choi Materials Characterization 163, 110204, 2020	106	2020
Microstructure and mechanical characteristics of multi-layered materials composed of 316L stainless steel and ferritic steel produced by direct energy deposition DK Kim, W Woo, EY Kim, SH Choi Journal of Alloys and Compounds 774, 896-907, 2019	104	2019
Simulation of stress concentration in Mg alloys using the crystal plasticity finite element method SH Choi, DH Kim, SS Park, BS You Acta Materialia 58 (1), 320-329, 2010	102	2010
Simulation of stored energy and orientation gradients in cold-rolled interstitial free steels SH Choi Acta Materialia 51 (6), 1775-1788, 2003	96	2003
3-D simulation of spatial stress distribution in an AZ31 Mg alloy sheet under in-plane compression SH Choi, DW Kim, BS Seong, AD Rollett International Journal of Plasticity 27 (10), 1702-1720, 2011	89	2011
Mechanical properties and microstructure of ultra fine-grained copper prepared by a high-speed-ratio differential speed rolling WJ Kim, KE Lee, SH Choi Materials Science and Engineering: A 506 (1-2), 71-79, 2009	85	2009
Deformation mechanisms and texture evolution in high entropy alloy during cold rolling L Kaushik, MS Kim, J Singh, JH Kang, YU Heo, JY Suh, SH Choi International Journal of Plasticity 141, 102989, 2021	84	2021
Experimental and numerical investigations of yield surface, texture, and deformation mechanisms in AA5754 over low to high temperatures and strain rates A Pandey, AS Khan, EY Kim, SH Choi, T Gnäupel-Herold International Journal of Plasticity 41, 165-188, 2013	83	2013
Macroscopic anisotropy in AA5019A sheets SH Choi, JC Brem, F Barlat, KH Oh Acta materialia 48 (8), 1853-1863, 2000	83	2000

Sistem, işlemi şu anda gerçekleştiremiyor. Daha sonra yeniden deneyin.

Makaleler 1–20

Yıllık alıntı sayısı

Mükerrer alıntılar

Birleştirilmiş alıntılar

Katkıda bulunan yazar ekleKatkıda bulunan yazarlar

Takip et

Alıntı yapanlar

Katkıda bulunan yazarlar