Richard J T Lin

Alıntı yapanlar

	Hepsi	2020 yılından bugüne
Alıntılar	2643	1399
h-endeksi	24	21
i10-endeksi	44	35

320

160

240

2003200420052006200720082009201020112012201320142015201620172018201920202021202220232024202513 10 13 25 11 38 44 41 70 81 70 78 96 114 152 172 183 205 248 313 284 280 69

Genel erişim

Tümünü görüntüle

4 makale

1 makale

genel erişime açık olanlar

genel erişime açık olmayanlar

Finansman sağlayan kuruluşun getirdiği zorunluluğa dayalı olarak

Katkıda bulunan yazarlar

Debes BhattacharyyaDistinguished Professor Emeritus, The University of Auckland, New Zealandauckland.ac.nz üzerinde doğrulanmış e-posta adresine sahip
Krishnan JayaramanProfessor, Department of Mechanical and Mechatronics Engineering, University of Aucklandauckland.ac.nz üzerinde doğrulanmış e-posta adresine sahip
Nam Kyeun KimThe University of Aucklandaucklanduni.ac.nz üzerinde doğrulanmış e-posta adresine sahip
Stoyko FakirovProfessor of Polymer Science, The Auckland Universityauckland.ac.nz üzerinde doğrulanmış e-posta adresine sahip
Ir. Ts. Dr. Azwan Iskandar AzmiAssoc. Prof., Universiti Malaysia Perlisunimap.edu.my üzerinde doğrulanmış e-posta adresine sahip
NURUL ZUHAIRAH MAHMUD ZUHUDISenior Lecturer, Universiti Kuala Lumpurunikl.edu.my üzerinde doğrulanmış e-posta adresine sahip
Oisik DasLuleå University of Technologyltu.se üzerinde doğrulanmış e-posta adresine sahip
Yu (Roger) Dong PhD FIMMM FHEA F...Associate Professor, School of Civil and Mechanical Engineering, Curtin Universitycurtin.edu.au üzerinde doğrulanmış e-posta adresine sahip
Mohammed Mehdi FaridProfessor at University of Aucklandauckland.ac.nz üzerinde doğrulanmış e-posta adresine sahip
Kaveh ShahbazThe university of Aucklandauckland.ac.nz üzerinde doğrulanmış e-posta adresine sahip
Abdolmajid AlipourDepartment of Mechanical Engineering, The University of Auckland, Auckland, New Zealandaucklanduni.ac.nz üzerinde doğrulanmış e-posta adresine sahip
Vojislav KecmanVCU, Virginia Commonwealth Universityvcu.edu üzerinde doğrulanmış e-posta adresine sahip
Cho-Pei JiangNational Taipei University of Technologymail.ntut.edu.tw üzerinde doğrulanmış e-posta adresine sahip
Friedrich K*Professor for Composite Materials, IVW, Technical University Kaiserslautern, Germanyivw.uni-kl.de üzerinde doğrulanmış e-posta adresine sahip
Ajit SarmahDepartment of Civil & Environmental Engineering, The University of Auckland, New Zealandauckland.ac.nz üzerinde doğrulanmış e-posta adresine sahip
Kean AwUniversity of Aucklandauckland.ac.nz üzerinde doğrulanmış e-posta adresine sahip
Kim PickeringUniversity of Waikatowaikato.ac.nz üzerinde doğrulanmış e-posta adresine sahip
MARIA A S OLIVEIRAUniversity of Waikatostudents.waikato.ac.nz üzerinde doğrulanmış e-posta adresine sahip
Rui ZhuTechnical Operations Manager, Level Homelevel.co üzerinde doğrulanmış e-posta adresine sahip
David P. HarperUniversity of Tennessee, Washington State Universityutk.edu üzerinde doğrulanmış e-posta adresine sahip

Takip et

Richard J T Lin

Honorary Research Academic in the Department of Mechanical Enginering, the University of Auckland

auckland.ac.nz üzerinde doğrulanmış e-posta adresine sahip

Composite Materials


Başlık Alıntılara göre sırala Yıla göre sırala Başlığa göre sırala	Alıntı yapanlar Alıntı yapanlar	Yıl
Machinability of a silicon carbide reinforced aluminium metal matrix composite JT Lin, D Bhattacharyya, C Lane Wear 181, 883-888, 1995	248	1995
Machinability study of glass fibre-reinforced polymer composites during end milling AI Azmi, RJT Lin, D Bhattacharyya The International Journal of Advanced Manufacturing Technology 64, 247-261, 2013	208	2013
Multiple regression and neural networks analyses in composites machining JT Lin, D Bhattacharyya, V Kecman Composites Science and Technology 63 (3-4), 539-548, 2003	164	2003
Chip formation in the machining of SiC-particle-reinforced aluminium-matrix composites JT Lin, D Bhattacharyya, WG Ferguson Composites Science and Technology 58 (2), 285-291, 1998	149	1998
Contribution of coalescence to microfibril formation in polymer blends during cold drawing S Fakirov, D Bhattacharyya, RJT Lin, C Fuchs, K Friedrich Journal of Macromolecular Science, Part B: Physics 46 (1), 183-194, 2007	138	2007
Particulate reinforced rotationally moulded polyethylene composites–mixing methods and mechanical properties W Yan, RJT Lin, D Bhattacharyya Composites science and technology 66 (13), 2080-2088, 2006	117	2006
Extruded short wool fibre composites: mechanical and fire retardant properties NK Kim, RJT Lin, D Bhattacharyya Composites Part B: Engineering 67, 472-480, 2014	115	2014
Flame retardant property of flax fabrics coated by extracellular polymeric substances recovered from both activated sludge and aerobic granular sludge NK Kim, N Mao, R Lin, D Bhattacharyya, MCM van Loosdrecht, Y Lin Water Research 170, 115344, 2020	111	2020
Experimental study of machinability of GFRP composites by end milling AI Azmi, RJT Lin, D Bhattacharyya Materials and Manufacturing Processes 27 (10), 1045-1050, 2012	89	2012
Tool wear prediction models during end milling of glass fibre-reinforced polymer composites AI Azmi, RJT Lin, D Bhattacharyya The International Journal of Advanced Manufacturing Technology 67, 701-718, 2013	84	2013
An attempt to find a suitable biomass for biochar-based polypropylene biocomposites O Das, NK Kim, MS Hedenqvist, RJT Lin, AK Sarmah, D Bhattacharyya Environmental management 62, 403-413, 2018	82	2018
A Novel Calcium Chloride Hexahydrate-Based Deep Eutectic Solvent as a Phase Change Materials FSMMMF K. Shahbaz, I.M. Al Nashef, R.J.T. Lin, M.A. Hashim Solar Energy Materials and Solar Cells 155, 147-154, 2016	82	2016
Effects of wool fibres, ammonium polyphosphate and polymer viscosity on the flammability and mechanical performance of PP/wool composites NK Kim, RJT Lin, D Bhattacharyya Polymer degradation and stability 119, 167-177, 2015	77	2015
Machinability investigation of medium-density fibreboard RJT Lin, J van Houts, D Bhattacharyya Walter de Gruyter 60 (1), 71-77, 2006	72	2006
Flammability and mechanical behaviour of polypropylene composites filled with cellulose and protein based fibres: a comparative study NK Kim, RJT Lin, D Bhattacharyya Composites Part A: Applied Science and Manufacturing 100, 215-226, 2017	71	2017
Flammability, thermal and dynamic mechanical properties of bamboo–glass hybrid composites NZM Zuhudi, RJT Lin, K Jayaraman Journal of Thermoplastic Composite Materials 29 (9), 1210-1228, 2016	70	2016
Determination of critical material parameters for numerical simulation of acrylic sheet forming Y Dong, RJT Lin, D Bhattacharyya Journal of materials science 40, 399-410, 2005	59	2005
Fabrication and characterization of Nylon 6/cellulose nanofibrils melt-spun nanocomposite filaments R Zhu, V Yadama, H Liu, RJT Lin, DP Harper Composites Part A: Applied Science and Manufacturing 97, 111-119, 2017	42	2017
Effects of machining parameters on surface quality of composites reinforced with natural fibers R John, R Lin, K Jayaraman, D Bhattacharyya Materials and Manufacturing Processes 36 (1), 73-83, 2021	37	2021
Finite element simulation on thermoforming acrylic sheets using dynamic explicit method Y Dong, RJT Lin, D Bhattacharyya Polymers and Polymer Composites 14 (3), 307-328, 2006	35	2006

Sistem, işlemi şu anda gerçekleştiremiyor. Daha sonra yeniden deneyin.

Makaleler 1–20

Yıllık alıntı sayısı

Mükerrer alıntılar

Birleştirilmiş alıntılar

Katkıda bulunan yazar ekleKatkıda bulunan yazarlar

Takip et

Alıntı yapanlar

Katkıda bulunan yazarlar