| A review on the various synthesis routes of TiC reinforced ferrous based composites K Das, TK Bandyopadhyay, S Das Journal of Materials Science 37 (18), 3881-3892, 2002 | 337 | 2002 |
| A review on the synthesis of in situ aluminum based composites by thermal, mechanical and mechanical–thermal activation of chemical reactions BSB Reddy, K Das, S Das Journal of Materials Science 42 (22), 9366-9378, 2007 | 205 | 2007 |
| Effect of stirring rate on the microstructure and microhardness of Ni–CeO2 nanocomposite coating and investigation of the corrosion property R Sen, S Das, K Das Surface and Coatings Technology 205 (13-14), 3847-3855, 2011 | 119 | 2011 |
| The Al-O-Ti (aluminum-oxygen-titanium) system K Das, P Choudhury, S Das Journal of phase equilibria 23 (6), 525, 2002 | 115 | 2002 |
| A study on the effect of pulse electrodeposition parameters on the morphology of pure tin coatings A Sharma, S Bhattacharya, S Das, K Das Metallurgical and Materials Transactions A 45 (10), 4610-4622, 2014 | 114 | 2014 |
| Effect of surfactant on the co-electrodeposition of the nano-sized ceria particle in the nickel matrix R Sen, S Bhattacharya, S Das, K Das Journal of alloys and compounds 489 (2), 650-658, 2010 | 94 | 2010 |
| A study on mechanical properties in friction stir lap welding of AA 6061-T6 and AISI 304 RP Mahto, R Bhoje, SK Pal, HS Joshi, S Das Materials Science and Engineering: A 652, 136-144, 2016 | 83 | 2016 |
| Synthesis and characterization of Al matrix composites reinforced by in situ alumina particulates TG Durai, K Das, S Das Materials Science and Engineering: A 445, 100-105, 2007 | 81 | 2007 |
| Synthesis and characterization of zircon sand/Al-4.5 wt% Cu composite produced by stir casting route S Das, V Udhayabanu, S Das, K Das Journal of materials science 41 (14), 4668-4677, 2006 | 78 | 2006 |
| Friction and wear behavior of Cu–CeO2 nanocomposite coatings synthesized by pulsed electrodeposition V Mangam, S Bhattacharya, K Das, S Das Surface and Coatings Technology 205 (3), 801-805, 2010 | 75 | 2010 |
| Evaluation of microstructural parameters of nanocrystalline Y2O3 by X-ray diffraction peak broadening analysis K Jayasankar, A Pandey, BK Mishra, S Das Materials Chemistry and Physics 171, 195-200, 2016 | 67 | 2016 |
| Mechanical activation-assisted solid-state combustion synthesis of in situ aluminum matrix hybrid (Al3Ni/Al2O3) nanocomposites BSB Reddy, K Rajasekhar, M Venu, JJS Dilip, S Das, K Das Journal of Alloys and Compounds 465 (1-2), 97-105, 2008 | 63 | 2008 |
| Influence of current density on microstructure of pulse electrodeposited tin coatings A Sharma, S Bhattacharya, R Sen, BSB Reddy, HJ Fecht, K Das, S Das Materials characterization 68, 22-32, 2012 | 59 | 2012 |
| Synthesis of calcium hydrogen phosphate and hydroxyapatite coating on SS316 substrate through pulsed electrodeposition R Chakraborty, S Sengupta, P Saha, K Das, S Das Materials Science and Engineering: C 69, 875-883, 2016 | 58 | 2016 |
| Influence of current density on surface morphology and properties of pulse plated tin films from citrate electrolyte A Sharma, S Bhattacharya, S Das, K Das Applied surface science 290, 373-380, 2014 | 57 | 2014 |
| Pulse-reverse electrodeposition of Cu–SiC nanocomposite coating: effect of concentration of SiC in the electrolyte AK Pradhan, S Das Journal of alloys and compounds 590, 294-302, 2014 | 54 | 2014 |
| Fabrication of Sn-Ag/CeO2 Electro-Composite Solder by Pulse Electrodeposition A Sharma, S Bhattacharya, S Das, K Das Metallurgical and Materials Transactions A 44 (12), 5587-5601, 2013 | 51 | 2013 |
| Effect of fuel-to-nitrate ratio on the powder characteristics of nanosized CeO2 synthesized by mixed fuel combustion method H Palneedi, V Mangam, S Das, K Das Journal of alloys and compounds 509 (41), 9912-9918, 2011 | 51 | 2011 |
| Effect of thermo-mechanical processing on the low impact abrasion and low stress sliding wear resistance of austenitic high manganese steels R Dalai, S Das, K Das Wear 420, 176-183, 2019 | 48 | 2019 |
| A study on the effect of electrodeposition parameters on the morphology of porous nickel electrodeposits S Sengupta, A Patra, S Jena, K Das, S Das Metallurgical and Materials Transactions A 49 (3), 920-937, 2018 | 47 | 2018 |
Karabi DasProfessor of Metallurgical and Materials Engineering, IIT KharagpurPreverjeni e-poštni naslov na metal.iitkgp.ac.in
