| Controlling the microstructure and properties of wire arc additive manufactured Ti–6Al–4V with trace boron additions MJ Bermingham, D Kent, H Zhan, DH StJohn, MS Dargusch Acta Materialia 91, 289-303, 2015 | 408 | 2015 |
| Recent developments and opportunities in additive manufacturing of titanium-based matrix composites: A review H Attar, S Ehtemam-Haghighi, D Kent, MS Dargusch International Journal of Machine Tools and Manufacture 133, 85-102, 2018 | 385 | 2018 |
| Nanoindentation and wear properties of Ti and Ti-TiB composite materials produced by selective laser melting H Attar, S Ehtemam-Haghighi, D Kent, IV Okulov, H Wendrock, M Bӧnisch, ... Materials Science and Engineering: A 688, 20-26, 2017 | 284 | 2017 |
| A comparison of cryogenic and high pressure emulsion cooling technologies on tool life and chip morphology in Ti–6Al–4V cutting MJ Bermingham, S Palanisamy, D Kent, MS Dargusch Journal of Materials Processing Technology 212 (4), 752-765, 2012 | 259 | 2012 |
| Comparative study of commercially pure titanium produced by laser engineered net shaping, selective laser melting and casting processes H Attar, S Ehtemam-Haghighi, D Kent, X Wu, MS Dargusch Materials Science and Engineering: A 705, 385-393, 2017 | 252 | 2017 |
| Optimising the mechanical properties of Ti-6Al-4V components produced by wire+ arc additive manufacturing with post-process heat treatments MJ Bermingham, L Nicastro, D Kent, Y Chen, MS Dargusch Journal of Alloys and Compounds 753, 247-255, 2018 | 207 | 2018 |
| New insights into the phase transformations to isothermal ω and ω-assisted α in near β-Ti alloys T Li, D Kent, G Sha, LT Stephenson, AV Ceguerra, SP Ringer, ... Acta Materialia 106, 353-366, 2016 | 199 | 2016 |
| Additive manufacturing of low-cost porous titanium-based composites for biomedical applications: Advantages, challenges and opinion for future development H Attar, S Ehtemam-Haghighi, N Soro, D Kent, MS Dargusch Journal of Alloys and Compounds 827, 154263, 2020 | 197 | 2020 |
| Mechanical properties and biocompatibility of porous titanium scaffolds for bone tissue engineering Y Chen, JE Frith, A Dehghan-Manshadi, H Attar, D Kent, NDM Soro, ... Journal of the mechanical behavior of biomedical materials 75, 169-174, 2017 | 181 | 2017 |
| Additively manufactured iron-manganese for biodegradable porous load-bearing bone scaffold applications D Carluccio, C Xu, J Venezuela, Y Cao, D Kent, M Bermingham, ... Acta biomaterialia 103, 346-360, 2020 | 167 | 2020 |
| Evaluation of the mechanical and wear properties of titanium produced by three different additive manufacturing methods for biomedical application H Attar, MJ Bermingham, S Ehtemam-Haghighi, A Dehghan-Manshadi, ... Materials Science and Engineering: A 760, 339-345, 2019 | 141 | 2019 |
| Tool life and wear mechanisms in laser assisted milling Ti–6Al–4V MJ Bermingham, WM Sim, D Kent, S Gardiner, MS Dargusch Wear 322, 151-163, 2015 | 126 | 2015 |
| Effects of deformation twinning on the mechanical properties of biodegradable Zn-Mg alloys S Liu, D Kent, N Doan, M Dargusch, G Wang Bioactive materials 4, 8-16, 2019 | 118 | 2019 |
| Ultrahigh strain hardening in a transformation-induced plasticity and twinning-induced plasticity titanium alloy Y Fu, W Xiao, D Kent, MS Dargusch, J Wang, X Zhao, C Ma Scripta Materialia 187, 285-290, 2020 | 100 | 2020 |
| Strength enhancement of a biomedical titanium alloy through a modified accumulative roll bonding technique D Kent, G Wang, Z Yu, X Ma, M Dargusch Journal of the Mechanical Behavior of Biomedical Materials 4 (3), 405-416, 2011 | 97 | 2011 |
| The mechanism of ω-assisted α phase formation in near β-Ti alloys T Li, D Kent, G Sha, MS Dargusch, JM Cairney Scripta Materialia 104, 75-78, 2015 | 96 | 2015 |
| Simultaneously enhanced strength and ductility in a metastable β-Ti alloy by stress-induced hierarchical twin structure L Ren, W Xiao, D Kent, M Wan, C Ma, L Zhou Scripta Materialia 184, 6-11, 2020 | 95 | 2020 |
| The dynamic response of a metastable β Ti–Nb alloy to high strain rates at room and elevated temperatures H Zhan, G Wang, D Kent, M Dargusch Acta Materialia 105, 104-113, 2016 | 91 | 2016 |
| Trace carbon addition to refine microstructure and enhance properties of additive-manufactured Ti-6Al-4V S Mereddy, MJ Bermingham, D Kent, A Dehghan-Manshadi, DH StJohn, ... Jom 70, 1670-1676, 2018 | 87 | 2018 |
| Constitutive modelling of the flow behaviour of a β titanium alloy at high strain rates and elevated temperatures using the Johnson–Cook and modified Zerilli–Armstrong models H Zhan, G Wang, D Kent, M Dargusch Materials Science and Engineering: A 612, 71-79, 2014 | 85 | 2014 |
Michael BerminghamUniversity of QueenslandEmail confirmado em uq.edu.au
