Følg
Ehsan Toyserkani
Ehsan Toyserkani
Mechanical and Mechatronics Engineering, University of Waterloo, Canada
Verifisert e-postadresse på uwaterloo.ca - Startside
Tittel
Sitert av
Sitert av
År
Laser cladding
E Toyserkani, A Khajepour, SF Corbin
CRC press, 2004
11182004
A critical review of powder-based additive manufacturing of ferrous alloys: Process parameters, microstructure and mechanical properties
H Fayazfar, M Salarian, A Rogalsky, D Sarker, P Russo, V Paserin, ...
Materials & Design 144, 98-128, 2018
6672018
3-D finite element modeling of laser cladding by powder injection: effects of laser pulse shaping on the process
E Toyserkani, A Khajepour, S Corbin
Optics and lasers in engineering 41 (6), 849-867, 2004
3392004
3-Dimensional heat transfer modeling for laser powder-bed fusion additive manufacturing with volumetric heat sources based on varied thermal conductivity and absorptivity
Z Zhang, Y Huang, AR Kasinathan, SI Shahabad, U Ali, Y Mahmoodkhani, ...
Optics & Laser Technology 109, 297-312, 2019
2642019
Cladding of WC–12 Co on low carbon steel using a pulsed Nd: YAG laser
CP Paul, H Alemohammad, E Toyserkani, A Khajepour, S Corbin
Materials Science and Engineering: A 464 (1-2), 170-176, 2007
2612007
A 3D dynamic numerical approach for temperature and thermal stress distributions in multilayer laser solid freeform fabrication process
M Alimardani, E Toyserkani, JP Huissoon
Optics and Lasers in Engineering 45 (12), 1115-1130, 2007
2522007
Advances in laser materials processing:technology, research and application
J Lawrence, J Pou, D Low, E Toyserkani
Woodhead Publishing Ltd., 2010
212*2010
3D-printed ultra-robust surface-doped porous silicone sensors for wearable biomonitoring
E Davoodi, H Montazerian, R Haghniaz, A Rashidi, S Ahadian, A Sheikhi, ...
ACS nano 14 (2), 1520-1532, 2020
1992020
Opportunities and challenges in additive manufacturing of functionally graded metallic materials via powder-fed laser directed energy deposition: A review
M Ansari, E Jabari, E Toyserkani
Journal of Materials Processing Technology 294, 117117, 2021
1862021
Prediction of melt pool depth and dilution in laser powder deposition
A Fathi, E Toyserkani, A Khajepour, M Durali
Journal of Physics D: Applied Physics 39 (12), 2613, 2006
1812006
Clad height control in laser solid freeform fabrication using a feedforward PID controller
A Fathi, A Khajepour, E Toyserkani, M Durali
The International Journal of Advanced Manufacturing Technology 35, 280-292, 2007
1692007
Additive manufacturing of silicone structures: A review and prospective
F Liravi, E Toyserkani
Additive Manufacturing 24, 232-242, 2018
1602018
Three-dimensional finite element modeling of laser cladding by powder injection: Effects of powder feedrate and travel speed on the process
E Toyserkani, A Khajepour, S Corbin
Journal of Laser Applications 15 (3), 153-160, 2003
1592003
Additively manufactured metallic biomaterials
E Davoodi, H Montazerian, AS Mirhakimi, M Zhianmanesh, O Ibhadode, ...
Bioactive materials 15, 214-249, 2022
1572022
An investigation into the effect of process parameters on melt pool geometry, cell spacing, and grain refinement during laser powder bed fusion
A Keshavarzkermani, E Marzbanrad, R Esmaeilizadeh, Y Mahmoodkhani, ...
Optics & Laser Technology 116, 83-91, 2019
1552019
Binder-jet powder-bed additive manufacturing (3D printing) of thick graphene-based electrodes
A Azhari, E Marzbanrad, D Yilman, E Toyserkani, MA Pope
Carbon 119, 257-266, 2017
1512017
On the effect of spatter particles distribution on the quality of Hastelloy X parts made by laser powder-bed fusion additive manufacturing
R Esmaeilizadeh, U Ali, A Keshavarzkermani, Y Mahmoodkhani, ...
Journal of Manufacturing Processes 37, 11-20, 2019
1482019
Micro-scale aerosol-jet printing of graphene interconnects
E Jabari, E Toyserkani
Carbon 91, 321-329, 2015
1462015
Solid freeform fabrication and characterization of porous calcium polyphosphate structures for tissue engineering purposes
Y Shanjani, JNA De Croos, RM Pilliar, RA Kandel, E Toyserkani
Journal of Biomedical Materials Research Part B: Applied Biomaterials 93 (2 …, 2010
1452010
Extrusion and Microfluidic‐Based Bioprinting to Fabricate Biomimetic Tissues and Organs
E Davoodi, E Sarikhani, H Montazerian, S Ahadian, M Costantini, ...
Advanced Materials Technologies, 1901044, 2020
1442020
Systemet kan ikke utføre handlingen. Prøv på nytt senere.
Artikler 1–20