| X-ray imaging of cavitation in diesel injectors D Duke, A Swantek, Z Tilocco, A Kastengren, K Fezzaa, K Neroorkar, ... SAE international Journal of Engines 7 (2), 1003-1016, 2014 | 97 | 2014 |
| Modeling of vapor-liquid equilibrium of gasoline-ethanol blended fuels for flash boiling simulations K Neroorkar, D Schmidt Fuel 90 (2), 665-673, 2011 | 61 | 2011 |
| Collaborative investigation of the internal flow and near-nozzle flow of an eight-hole gasoline injector (Engine Combustion Network Spray G) CK Mohapatra, DP Schmidt, BA Sforzo, KE Matusik, Z Yue, CF Powell, ... International Journal of Engine Research 24 (6), 2297-2314, 2023 | 49 | 2023 |
| Simulation of flash boiling in pressure swirl injectors K Neroorkar, S Gopalakrishnan, RO Grover Jr, DP Schmidt Atomization and Sprays 21 (2), 2011 | 48 | 2011 |
| Application of the homogeneous relaxation model to simulating cavitating flow of a diesel fuel K Neroorkar, B Shields, RO Grover Jr, AP Torres, D Schmidt SAE Technical Paper, 2012 | 41 | 2012 |
| Numerical simulation of ablation for reentry vehicles A Ayasoufi, R Rahmani, G Cheng, R Koomullil, K Neroorkar 9th AIAA/ASME Joint thermophysics and heat transfer conference, 2908, 2006 | 35 | 2006 |
| High-resolution large eddy simulations of cavitating gasoline–ethanol blends DJ Duke, DP Schmidt, K Neroorkar, AL Kastengren, CF Powell International Journal of Engine Research 14 (6), 578-589, 2013 | 34 | 2013 |
| Modeling of flash boiling flows in injectors with gasoline-ethanol fuel blends K Neroorkar University of Massachusetts Amherst, 2011 | 27 | 2011 |
| Validation and assessment of turbulence transition models G Cheng, R Nichols, K Neroorkar, P Radhamony 47th AIAA Aerospace Sciences Meeting including The New Horizons Forum and …, 2009 | 26 | 2009 |
| Comparison of the homogeneous relaxation model and a rayleigh plesset cavitation model in predicting the cavitating flow through various injector hole shapes F Brusiani, S Negro, GM Bianchi, M Moulai, K Neroorkar, D Schmidt SAE Technical Paper, 2013 | 24 | 2013 |
| Numerical study of flow augmented thermal management for entry and re-entry environments G Cheng, K Neroorkar, YS Chen, TS Wang, E Daso 25th AIAA Applied Aerodynamics Conference, 4560, 2007 | 24 | 2007 |
| A computational investigation of flash-boiling multi-hole injectors with gasoline-ethanol blends K Neroorkar, D Schmidt SAE Technical Paper, 2011 | 21 | 2011 |
| Cavitation as rapid flash boiling B Shields, K Neroorkar, DP Schmidt ILASS-Americas 23rd Annual Conference on Liquid Atomization and Spray …, 2011 | 16 | 2011 |
| Thermal and inertial equilibrium in small, high-speed, cavitating nozzle simulations D Schmidt, S Rakshit, K Neroorkar 11th International Conference on Liquid Atomization and Spray Systems …, 2009 | 14 | 2009 |
| Comparing simulations and X-ray measurements of a cavitating nozzle DJ Duke, AL Kastengren, AB Swantek, N Sovis, K Fezzaa, K Neroorkar, ... Proceedings of the ilassamericas 26th annual conference on liquid …, 2014 | 10 | 2014 |
| Numerical analysis of the influence of diesel nozzle design on internal flow characteristics for 2-valve diesel engine application J De la Morena, K Neroorkar, AH Plazas, RC Peterson, DP Schmidt Atomization and Sprays 23 (2), 2013 | 10 | 2013 |
| Simulations and analysis of fuel flow in an injector including transient needle effects KD Neroorkar, CE Mitcham, A Plazas, T Grover, D Schmidt ILASS-Americas 24th Annual Conf Liquid Atomization and Spray Systems, 2012 | 8 | 2012 |
| Review and Assessment of Turbulence Transition Models GC Cheng, R Nichols, KD Neroorkar International Journal of Engineering Research and Development 13 (4), 32-57, 2017 | 4 | 2017 |
| Model constant optimization using an ensemble of experimental data J Bliss, D Schmidt, J Smith, K Neroorkar SAE Technical Paper, 2012 | 4 | 2012 |
| EFFECT OF TURBULENCE ON MODELING OF LIQUID FILMS K Neroorkar, M Tandon | 1 | |
