| On the anisotropic mechanical properties of selective laser-melted stainless steel L Hitzler, J Hirsch, B Heine, M Merkel, W Hall, A Öchsner Materials 10 (10), 1136, 2017 | 238 | 2017 |
| Direction and location dependency of selective laser melted AlSi10Mg specimens L Hitzler, C Janousch, J Schanz, M Merkel, B Heine, F Mack, W Hall, ... Journal of Materials Processing Technology 243, 48-61, 2017 | 222 | 2017 |
| A review of metal fabricated with laser‐and powder‐bed based additive manufacturing techniques: process, nomenclature, materials, achievable properties, and its utilization in … L Hitzler, M Merkel, W Hall, A Öchsner Advanced Engineering Materials 20 (5), 1700658, 2018 | 191 | 2018 |
| Additive manufacturing of cobalt-based dental alloys: analysis of microstructure and physicomechanical properties L Hitzler, F Alifui-Segbaya, P Williams, B Heine, M Heitzmann, W Hall, ... Advances in materials science and engineering 2018, 2018 | 103 | 2018 |
| Fracture toughness of selective laser melted AlSi10Mg L Hitzler, J Hirsch, J Schanz, B Heine, M Merkel, W Hall, A Öchsner Proceedings of the Institution of Mechanical Engineers, Part L: Journal of …, 2019 | 58 | 2019 |
| Tensile and compressive behaviour of additively manufactured AlSi10Mg samples E Sert, L Hitzler, S Hafenstein, M Merkel, E Werner, A Öchsner Progress in Additive Manufacturing 5 (3), 305-313, 2020 | 54 | 2020 |
| Non‐destructive evaluation of AlSi10Mg prismatic samples generated by selective laser melting: Influence of manufacturing conditions: Zerstörungsfreie Untersuchungen an mittels … L Hitzler, C Janousch, J Schanz, M Merkel, F Mack, A Öchsner Materialwissenschaft und Werkstofftechnik 47 (5-6), 564-581, 2016 | 52 | 2016 |
| Position dependent surface quality in selective laser melting: Positionsabhängige Oberflächenqualität im selektiven Laserstrahlschmelzen L Hitzler, J Hirsch, M Merkel, W Hall, A Öchsner Materialwissenschaft und Werkstofftechnik 48 (5), 327-334, 2017 | 48 | 2017 |
| Laser polishing of additive manufactured AlSi10Mg parts with an oscillating laser beam J Schanz, M Hofele, L Hitzler, M Merkel, H Riegel Machining, Joining and Modifications of Advanced Materials, 159-169, 2016 | 41 | 2016 |
| Compressive behaviour of additively manufactured AlSi10Mg: Druckeigenschaften additiv gefertigter AlSi10Mg Proben L Hitzler, N Schoch, B Heine, M Merkel, W Hall, A Öchsner Materialwissenschaft und Werkstofftechnik 49 (5), 683-688, 2018 | 32 | 2018 |
| Metallurgical investigations of laser remelted additively manufactured AlSi10Mg parts: Metallurgische Untersuchungen von laserstrahlumgeschmolzenen additiv hergestellten … J Schanz, M Hofele, S Ruck, T Schubert, L Hitzler, G Schneider, M Merkel, ... Materialwissenschaft und Werkstofftechnik 48 (5), 463-476, 2017 | 31 | 2017 |
| The influence of post-heat-treatments on the tensile strength and surface hardness of selective laser melted AlSi10Mg L Hitzler, A Charles, A Öchsner Defect and Diffusion Forum 370, 171-176, 2017 | 31 | 2017 |
| Heat treatments and critical quenching rates in additively manufactured Al–Si–Mg alloys L Hitzler, S Hafenstein, F Mendez Martin, H Clemens, E Sert, A Öchsner, ... Materials 13 (3), 720, 2020 | 30 | 2020 |
| In-plane anisotropy of selective laser-melted stainless steel: The importance of the rotation angle increment and the limitation window L Hitzler, J Hirsch, J Tomas, M Merkel, W Hall, A Öchsner Proceedings of the Institution of Mechanical Engineers, Part L: Journal of …, 2019 | 22 | 2019 |
| Tensile strength performance with determination of the Poisson‘s ratio of additively manufactured AlSi10Mg samples E Sert, E Schuch, A Öchsner, L Hitzler, E Werner, M Merkel Materialwissenschaft und Werkstofftechnik 50 (5), 539-545, 2019 | 20 | 2019 |
| The Dimensional Accuracy of Thin-Walled Parts Manufactured by Laser-Powder Bed Fusion Process J Tomas, L Hitzler, M Köller, J Von Kobylinski, M Sedlmajer, E Werner, ... Journal of Manufacturing and Materials Processing 4 (3), 91, 2020 | 18 | 2020 |
| Fracture toughness of L-PBF fabricated aluminium–silicon: a quantitative study on the role of crack growth direction with respect to layering L Hitzler, E Sert, E Schuch, A Öchsner, M Merkel, B Heine, E Werner Progress in Additive Manufacturing 5 (3), 259-266, 2020 | 18 | 2020 |
| The influence of post‐heat treatments on the tensile strength and surface hardness of selectively laser‐melted AlSi10Mg S Heilgeist, B Heine, M Merkel, L Hitzler, Z Javanbakht, A Öchsner Materialwissenschaft und Werkstofftechnik 50 (5), 546-552, 2019 | 18 | 2019 |
| Additive manufacturing: A review of the influence of building orientation and post heat treatment on the mechanical properties of aluminium alloys E Sert, A Öchsner, L Hitzler, E Werner, M Merkel State of the Art and Future Trends in Material Modeling, 349-366, 2019 | 16 | 2019 |
| Morphological and crystallographic effects in the laser powder-bed fused stainless steel microstructure T Fischer, L Hitzler, E Werner Crystals 11 (6), 672, 2021 | 14 | 2021 |
Andreas OechsnerEsslingen University of Applied Sciences - GermanyVerified email at hs-esslingen.de
