| Study of the effect of tool wear on hole quality in drilling CFRP to select a suitable drill for multi-criteria hole quality D Samuel Raj, L Karunamoorthy Materials and Manufacturing Processes 31 (5), 587-592, 2016 | 85 | 2016 |
| On the benefits of sub-zero air supplemented minimum quantity lubrication systems: An experimental and mechanistic investigation on end milling of Ti-6-Al-4-V alloy D Mark Benjamin, V Narayanan Sabarish, MV Hariharan, D Samuel Raj Tribology International 119, 464-473, 2018 | 64 | 2018 |
| Modeling and optimization of process parameters for defect toleranced drilling of GFRP composites S Arul, D Samuel Raj, L Vijayaraghavan, SK Malhotra, R Krishnamurthy Materials and Manufacturing Processes 21 (4), 357-365, 2006 | 61 | 2006 |
| A new and comprehensive characterisation of tool wear in CFRP drilling using micro-geometry and topography studies on the cutting edge D Samuel Raj, L Karunamoorthy Journal of Manufacturing Processes 32, 839-856, 2018 | 42 | 2018 |
| Performance of cryogenically treated WC drill using tool wear measurements on the cutting edge and hole surface topography when drilling CFRP D Samuel Raj, L Karunamoorthy International Journal of Refractory Metals and Hard Materials 78, 32-44, 2019 | 40 | 2019 |
| Simplified MQL System for Drilling AISI 304 SS using Cryogenically Treated Drills B Naveena, SS Mariyam Thaslima, V Savitha, B Naveen Krishna, ... Materials and Manufacturing Processes 32 (5), 1679-1684, 2017 | 31 | 2017 |
| Effect of cutting edge radius on end milling Ti–6Al–4V under minimum quantity cooling lubrication–chip morphology and surface integrity study B Hariprasad, SJ Selvakumar, DS Raj Wear 498, 204307, 2022 | 24 | 2022 |
| Cutting edge—flatting and roughness measurement—to monitor blunting and chipping of the drill cutting edge when drilling CFRP D Samuel Raj, L Karunamoorthy The International Journal of Advanced Manufacturing Technology 92 (1-4), 953-968, 2017 | 24 | 2017 |
| Optimization of jet position and investigation of the effects of multijet MQCL during end milling of Ti-6Al-4V G Pradeep Krishnan, P Saravanan, D Samuel Raj, S Hussain, ... Journal of Manufacturing Processes 64, 392-408, 2021 | 22 | 2021 |
| Performance analysis of tools with rake face textures produced using wire-EDM in turning AISI4340 V Udaya Kumar, D Samuel Raj Materials and Manufacturing Processes, 1-15, 2021 | 21* | 2021 |
| A Novel contact area based analysis to study the thermo-mechanical effect of cutting edge radius using numerical and multi-sensor experimental investigation in turning S Ebi Bernard, R Selvaganesh, G Khoshick, D Samuel Raj Journal of Materials Processing Technology, 117085, 2021 | 18 | 2021 |
| A combined numerical and experimental investigation of minimum quantity lubrication applied to end milling of Ti6Al4V alloy V Sabarish Narayanan, Mark Benjamin D, MV Hariharan, K Raja, ... Machining Science and Technology, 1-28, 2020 | 15* | 2020 |
| Performance analysis of drills with structured surfaces when drilling CFRP/AA7075 stack under MQL condition SJ Selvakumar, SM Muralidharan, D Samuel Raj Journal of Manufacturing Processes 89, 194-219, 2023 | 12 | 2023 |
| Machinability and tribological analysis of used cooking oil for MQL applications in drilling AISI 304 using a low-cost pneumatic operated MQL system G Pradeep Krishnan, D Samuel Raj Journal of Manufacturing Processes 104, 348-371, 2023 | 9* | 2023 |
| Analysis of high speed drilling AISI 304 under MQL condition through a novel tool wear measurement method and surface integrity studies GP Krishnan, DS Raj Tribology International 176, 2022 | 9 | 2022 |
| Effect of EDMed rake face grooves on the chip breaking capability of twist drills during deep hole drilling of Al 6061 aluminum alloy GJ Bain, D Samuel Raj Materials and Manufacturing Processes, 1-21, 2022 | 8 | 2022 |
| Evaluation of the effect of cryogenic treatment of HSS drills at different holding time in drilling AISI 316-SS L Bhaskar, D Samuel Raj Engineering Research Express 2 (2), 025005, 2020 | 8 | 2020 |
| Six Sigma implementation in a manufacturing unit – a case study MB Hemadri Chadalavada, D. Samuel Raj Int. J. Productivity and Quality Management 19 (4), 409-422, 2016 | 8 | 2016 |
| Production Lead Time Reduction in a Battery Manufacturing Unit using Lean Manufacturing H Chadavalada, S Raj D, A Kumar R, S K International Journal of Engineering Research and Technology 4 (4), 842-847, 2015 | 7 | 2015 |
| Effect of edge radius on forces, tool wear and surface integrity under edge radius dominated tool-chip contact conditions J Selvakumar, S Sakthivel, JA Praveen, S Raj Proceedings of The Institution of Mechanical Engineers Part B-Journal of …, 2024 | 5 | 2024 |
Karunamoorthy LoganathanProfessor, Department of Mechanical Engineering, Anna University, chennai 25, IndiaBestätigte E-Mail-Adresse bei annauniv.edu